128-byte EDID base block for an LG LP141WX1 panel, TL variant marked 02. It carries the manufacturer and product identifiers plus timing descriptors read by the GPU during startup. A technician programs it into the panel EEPROM to recover a screen that is not detected or shows corrupted identification after a failed update or chip damage. Compare it with the A2 file for the same model, confirm the suffix on the label, and read out the existing chip first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →