128-byte EDID record for an LG LP150X08 LCD panel, TL variant, AC revision. This base block holds vendor ID, product code, timing descriptors and a checksum that the graphics controller reads from the panel memory. It is used to restore a display that is not recognised or shows an incorrect mode after its EEPROM lost data. Open it in an EDID editor to verify the checksum, check the revision on the panel label, and read out the original chip before writing the replacement.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (7)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @pepeelectronica | 20 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 26 Apr 2022 | Open file on RM Schematics |
| @schematics_bios | 23 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 25 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 2 Aug 2026 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →