EDID data for the LG LP154W01 15.4-inch laptop panel, revision TL A2. At 128 bytes it contains one base EDID block with the display native resolution, timing details and manufacturer identification. The block is written into the panel I2C EEPROM to recover from corrupted contents, which typically cause a blank screen, missing detection or wrong resolution. Some panels use a 256-byte chip, so the image may need padding for a full write; back up the original EEPROM and verify after programming.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →