LG LP154WX4 EDID dump for the TL B2 variant, a 15.4-inch WXGA laptop panel. This 256-byte file is the identification data stored in the panel EEPROM and read via the DDC lines to set native mode and timings. It is used to restore a display that shows a black screen or generic resolution after corrupted EDID. The B2 revision on the label should match; a separate B4 image exists for the same panel. Back up the existing chip before writing with an I2C EEPROM programmer.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →