EDID contents for an LG LP154WX4 LCD matrix in the TL (C5) variant, stored as a 256-byte binary. The data describes timings, native mode and manufacturer ID that the graphics driver reads from the panel EEPROM over the DDC lines. A damaged or blank EDID often causes a black screen, a generic monitor entry or a fixed low resolution, and rewriting a known-good copy fixes it. Check that the suffix on the panel label matches and read out the existing chip before overwriting.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →