Panel EEPROM dump for the LG LP156WH1 15.6-inch screen, revision TL A3, as a 256-byte EDID file. These bytes describe the vendor, native resolution and timing data that the laptop graphics reads to drive the LCD. When the EEPROM is erased or corrupted, flashing a matching image restores normal detection. Use an I2C programmer or EDID tool, back up the existing chip before writing, and confirm that the panel label carries the same LP156WH1 TL A3 code, since other revisions may use different timings.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →