Panel EDID for the LG LP156WH2 15.6-inch display, a 256-byte raw binary dump. This data lives in the I2C EEPROM on the LCD and describes native resolution, timings and vendor information to the laptop graphics. Restoring it can fix panels that stay dark or are misdetected after the EEPROM got corrupted. Read and keep the current contents before programming, and confirm the panel label reads LP156WH2, because different sub-versions may need different EDID.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @laptop_bios_schematic. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →