LG LP156WH2 display data image, 256 bytes in size, covering the 15.6-inch panel used in many notebooks; the name carries no revision code. The file holds EDID values such as manufacturer ID, native resolution and timings, which the GPU reads over I2C. When this EEPROM is corrupted, rewriting it with a known dump often brings the picture back. Read and archive the existing chip first, check the panel revision on the rear label, and use a programmer that supports the small 24-series EEPROM inside.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →