EDID image for the LG LP156WH2 notebook panel, TL A1 variant, a 15.6-inch HD display. This 256-byte binary contains the identification block the laptop reads over the DDC bus to configure resolution and timings. Restoring it into the panel EEPROM is a standard repair when the data is corrupted, causing a black screen or a generic monitor entry. Check that the LP156WH2 TL A1 code on the rear label matches, back up the current chip and write with a programmer supporting small serial EEPROMs.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →