EDID dump for the E1 revision of the LG LP156WH3 TL 15.6-inch laptop panel. It is 256 bytes long, the complete content of a 24C02-type EEPROM fitted on the panel to report display identity and timings through DDC. Writing this known-good copy is a practical fix for screens that are not detected, display no picture or offer only generic resolutions. Different revisions of LP156WH3 carry distinct data, so confirm E1 on the sticker, back up the existing chip and verify the write afterwards.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →