LG LP156WH3 EDID image for the TL S1 revision of this 15.6-inch notebook LCD. Sized at 256 bytes, it fills a 24C02-class EEPROM and can be programmed as a whole-chip image with a hardware programmer or a suitable software EDID tool. Repairers reach for such a dump when a panel is not recognised, reports the wrong name or falls back to low resolutions after corruption. Other LP156WH3 revisions such as Q1 or E1 have their own data, so confirm the S1 code on the panel sticker.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @laptop_bios_schematic | 28 Dec 2020 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 27 Jan 2025 | Open file on RM Schematics |
| @schematiclaptopramkushwaha | 14 Jul 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →