EDID data for the LG LP156WH4 panel with the TL and N1 label suffixes kept in the name. The 256-byte binary covers a base EDID block plus a second 128-byte region, matching the capacity of a 24C02-type EEPROM. Technicians write it back when the panel's identification data is corrupted and the laptop shows no picture or a wrong resolution. Match the suffix codes on your panel sticker, read and save the current contents, then program with an I2C programmer and verify the write.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @laptop_bios_schematic | 28 Dec 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
| @schematiclaptopramkushwaha | 14 Jul 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →