EDID dump for the LG LP156WH4 15.6-inch LCD panel, revision code TL N2, stored as a 256-byte binary. Panel EDID tells the GPU the native resolution, timing and vendor information, and when the EEPROM inside the panel gets corrupted the screen may stay black or run at the wrong mode. Technicians flash this image back to the 24-series EEPROM through the panel connector or with an I2C programmer. Match the full part code including the TL N2 suffix printed on the panel label, and save the original data first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @laptop_bios_schematic | 28 Dec 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
| @schematiclaptopramkushwaha | 14 Jul 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →