Display EDID dump for the LG LP173WD1 panel, TL variant, revision A1, in a 256-byte binary that matches a 24C02 EEPROM. Repair shops use such a file to restore panel identification after the chip was erased, corrupted by a bad driver tool or replaced. Symptoms that point to EDID trouble include no picture on the internal screen while the external output works, or wrong resolution choices. Verify the revision suffix on the panel sticker and save the original contents before programming.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (6)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @laptop_bios_schematic | 28 Dec 2020 | Open file on RM Schematics |
| @laptop_bios_schematic | 28 Dec 2020 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 27 Jan 2025 | Open file on RM Schematics |
| @schematiclaptopramkushwaha | 14 Jul 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →