EDID binary for the LG LP173WD1 LCD in the TL (E1) revision, 256 bytes in size. It is the identification data kept in the small serial EEPROM on the panel, used by the GPU to choose the correct mode and timings. A technician flashes it when the internal display is not detected or the EDID checksum is broken. The A1 and A3 revisions of this model exist as separate files, so confirm the E1 suffix on the panel sticker and read the original before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (6)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @laptop_bios_schematic | 28 Dec 2020 | Open file on RM Schematics |
| @acodis_lcd_datasheets_EDID | 25 Jun 2023 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 27 Jan 2025 | Open file on RM Schematics |
| @schematiclaptopramkushwaha | 14 Jul 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →