Scaler firmware for the LG W1942S-PFU monitor, offered as a zip of roughly 80 KB. Per the name, it is a 256 KB image for the Winbond W25X20 serial flash, a 2 Mbit chip in an 8-pin package on the main board. Technicians write it back when a monitor remains dark, flashes its power LED or shows garbled menus after a firmware fault. Power the board down, attach a programmer, save the original data first, then flash and verify; a second variant of this dump is also catalogued.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 27 Feb 2018 | Open file on RM Schematics |
| @abgm_manutencao_bios | 8 Aug 2019 | Open file on RM Schematics |
| @biositechyangiyer | 19 May 2020 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
How to open a .zip file
Compressed archive that every operating system opens without extra software.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →