Firmware dump for the LG W1943SE monitor, a small 256 KB binary. The name gives no board or chip details, so inspect the monitor main board to identify the flash or scaler memory the image belongs to. Monitor firmware like this is usually written to a 2 Mbit SPI flash with a programmer to fix symptoms such as no image, boot loops or a dead power LED caused by corrupted data. Read the existing chip first and keep a backup, and confirm the chip capacity matches 256 KB before programming.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosbigarchives. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →