Monitor ROM for the LG W1952TQT, supplied as a zip of about 95 KB containing a 256 KB flash image. The name does not state the flash chip, so read the marking on the board before choosing a device in your programmer software; a 256 KB image corresponds to a 2 Mbit SPI part. Such dumps are used to recover the scaler firmware when the display will not power up properly, shows no image or has a frozen menu. Save the original chip contents first so you can return to them if needed.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 27 Feb 2018 | Open file on RM Schematics |
| @biositechyangiyer | 19 May 2020 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
How to open a .zip file
Compressed archive that every operating system opens without extra software.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →