LG W2053TQ LCD monitor firmware, version V117 dated 090827 with checksum 7E5A, provided as a raw 224 KB binary. Monitor scaler firmware like this is written to the small SPI flash on the main board to cure faults such as no picture, stuck standby or a dead on-screen menu caused by corrupted code. Use a programmer that supports the chip, read and save the original contents first, and compare the board and panel with your unit before flashing, since monitors with the same model name may use different hardware.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 30 Jan 2018 | Open file on RM Schematics |
| @abgm_manutencao_bios | 8 Aug 2019 | Open file on RM Schematics |
| @biositechyangiyer | 19 May 2020 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →