Firmware for the LG W2053TQ monitor, version V118 dated 090912 with checksum 7751, a 224 KB raw binary. It is a newer build than V117 for the same model and is written to the scaler board's SPI flash to fix power, image or menu faults from corrupted firmware. Program it with a suitable SPI programmer, verify the checksum after writing, and keep a backup of the original chip. Confirm the main board and panel version match your monitor, since different hardware revisions may need different firmware.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 30 Jan 2018 | Open file on RM Schematics |
| @abgm_manutencao_bios | 8 Aug 2019 | Open file on RM Schematics |
| @biositechyangiyer | 19 May 2020 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →