Linksys WAG120N firmware, version 1.8, delivered as a 3.47 MB RAR archive for this ADSL2+ wireless router. The name does not say whether the content is a raw chip dump or a vendor upgrade image, so inspect it first. A raw dump can be programmed onto the flash chip with an external programmer to revive a unit that no longer boots. Save the original flash contents before writing, since they hold device-specific MAC and settings, and check that the image size matches the chip installed on the board.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 19 Dec 2020 | Open file on RM Schematics |
| @biositechyangiyer | 23 Dec 2020 | Open file on RM Schematics |
| @biositechyangiyer | 1 Feb 2021 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →