Intel LKF (Lakefield) firmware module version 133.0.10.1049, LP variant, stepping B, production build, 80 KB. Its naming follows the PMC firmware pattern used for other Intel chipsets, where the module controls power management from inside the ME region. It is added to an image with Intel Flash Image Tool, not programmed alone. Before use, check that the stepping and variant match the hardware, and read the original chip twice with a programmer to keep a verified backup.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 6 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →