EEPROM dump from a 24C64 chip for a 32-inch TV labelled LO32XRDBL, with DCR, AX68 and PNL AP02 tags matching the companion SPI flash image. At 8 KB it exactly fills a 64 Kbit I2C EEPROM, which usually stores settings, panel parameters and user data. Replacing a corrupted EEPROM can cure wrong picture, no sound or menu faults. Program it with an I2C-capable programmer, ideally together with the matching flash image, and read the original chip first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @led_software. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @led_software | 1 Jan 2019 | Open file on RM Schematics |
| @led_software | 24 Nov 2021 | Open file on RM Schematics |
| @hashmielecom | 4 Mar 2023 | Open file on RM Schematics |
| @hashmielecom | 5 Mar 2023 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 29 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →