EDID base block of 128 bytes for an LP154WP1-TLA2 panel, labelled as the Dell version. OEM panels often carry customer-specific strings and IDs, so a Dell-sourced copy is preferable when restoring a display in a Dell notebook. Write it to the panel EEPROM with a programmer if the screen is unrecognised, has a bad checksum or causes a black display. Confirm the TLA2 suffix on the panel label before flashing and keep a dump of the existing chip in case you need to revert.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (6)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ITHINKHS | 8 Oct 2020 | Open file on RM Schematics |
| @pepeelectronica | 26 Apr 2022 | Open file on RM Schematics |
| @schematics_bios | 25 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 2 Aug 2026 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →