A 128-byte EDID dump for the LTD141EN9B panel in an IBM T60, marked in Chinese as a customer version, meaning it was read from a customer's unit rather than a reference source. It is one base EDID block the panel sends over DDC to identify itself and its timings. Use it to reprogram a damaged panel EEPROM, but inspect the data in an EDID viewer and confirm the panel part code first. Back up the existing chip before writing and verify the checksum afterwards.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →