An EDID dump for the LTN141W1-L02 LCD panel, labelled for the Dell D620 laptop. At 128 bytes it holds a single base EDID block, the identification data the panel reports to the graphics controller over the DDC lines. Technicians write it back to the small I2C EEPROM on the panel when the original is corrupted and the screen stays blank, shows a wrong resolution or appears as an unknown monitor. Read and save the existing chip first, and confirm the panel part number on its rear label before programming.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (9)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ITHINKHS | 8 Oct 2020 | Open file on RM Schematics |
| @pepeelectronica | 20 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 26 Apr 2022 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
| @schematics_bios | 23 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 25 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 2 Aug 2026 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →