EDID data for the LTN141W1-L09 LCD panel, marked for the Dell 1400 notebook. The 128 bytes make up one base EDID block with the panel's manufacturer code, model ID and preferred timing. Rewriting it into the panel's serial EEPROM is the usual way to recover a display that the laptop no longer recognises properly or that shows at the wrong resolution. Verify the L09 suffix on the panel label first, dump and save the original chip, and confirm the write with a readback compare.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ITHINKHS | 8 Oct 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →