Dell-labelled EDID data for an LTN141 series 14.1-inch panel, with the code written as LTN141x72713, whose exact meaning is not clear from the name. The 128-byte file is a single base EDID block as found on older LVDS screens. It is written into the panel EEPROM to fix a Dell laptop that cannot identify its display or uses the wrong timings. Since the model code is ambiguous, verify the panel label carefully, keep a backup of the existing chip and confirm the checksum after programming.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ITHINKHS | 8 Oct 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →