Panel EDID dump for an LTN150PG-L02 display, marked SXGA+ resolution, with Dell 5160 and the code Y0812 included in the name. The 256-byte image holds the base EDID plus an extension block describing native mode, timings and vendor data. Y0812 looks like a Dell part reference, but the name does not define it, so check it against the panel label. Write it with an EEPROM programmer or EDID tool to restore a corrupted panel identity. Always read and save the existing contents before overwriting them.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ITHINKHS | 8 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →