256-byte EDID dump for the Samsung LTN154X3-L09 15.4-inch LCD panel as used in the Dell Inspiron 6400, according to the name. The binary is the content of the panel serial EEPROM that reports resolution and timings to the graphics controller. Writing it back fixes missing or garbled display identification after the EEPROM gets corrupted. Open it in an EDID editor to verify checksum and panel ID first, save the original chip contents, and flash it with an I2C capable programmer or a vendor EDID tool.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ITHINKHS | 8 Oct 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →