EDID data for the LTN156AT16-L01 15.6-inch class panel, labelled in the name as taken from a Lenovo G570. Size is 256 bytes, a base EDID block followed by an extension block. The data identifies the panel and its supported timings to the system graphics. Repairers reflash it into the panel's small I2C EEPROM when the laptop shows no image, the wrong resolution or an unrecognised display. View it first in a hex or EDID editor and check the checksum. Match the panel sticker and back up the original chip.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →