EDID data image of 256 bytes for the Samsung LTN170CT05 17-inch panel at 1920x1200; the Russian name says it seemingly fits that panel, so treat it as untested. EDID lives in a tiny EEPROM on the LCD and tells the system the panel timing and resolution. A corrupted one causes no image or wrong resolution. Technicians read and rewrite it with a programmer or an EDID utility. Back up the existing EEPROM first and check the image with an EDID viewer before writing, since a mismatched block can blank the screen.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ITHINKHS | 8 Oct 2020 | Open file on RM Schematics |
| @acodis_lcd_datasheets_EDID | 25 Jun 2023 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →