EDID image for an LTN170CT05 17-inch panel, which the name describes as WUXGA and associates with the code CY194, stored as 256 bytes. The CY194 reference is probably a system-maker part number, though its exact meaning is not stated. Use the file to rewrite a panel EEPROM that has been wiped or damaged, leaving the laptop with a dark or low-resolution screen. Make sure the installed panel really is the LTN170CT05 WUXGA variant, read and store the original contents, then confirm the checksum once the new data is written.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ITHINKHS | 8 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 29 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →