EDID binary for the Samsung-coded LTN170X2-L03 17 inch panel, from a Dell laptop with regulatory model PP22X according to the name, 256 bytes in size. The data identifies the panel and lists its supported timings for the graphics controller. Writing it back can restore a display that shows nothing, appears as unknown or runs at the wrong resolution after EEPROM corruption. Check the L03 revision on the panel label, save the existing contents beforehand and program over the DDC bus with a suitable tool.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ITHINKHS | 8 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →