EDID dump for the LTN173KT01-Q01 17.3 inch panel, taken from a Dell Inspiron N7110 as the name states, size 256 bytes. The binary carries the display descriptor block read by the system to set resolution and timings. Technicians program it into the panel EEPROM when the screen goes black, is not recognised or defaults to a wrong mode. Verify the Q01 suffix on the panel sticker matches, back up the current EEPROM content first and use an EDID tool or I2C programmer to write it.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ITHINKHS | 8 Oct 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →