Working firmware set for mainboard GK7CP6S V1.0, a 10-layer PCB, with images for the chips at positions U20 and U8, archived as 14.0 MB RAR. The two designators likely correspond to separate flash devices, so each image should be written to its matching location. Marked as tested and fully working. Check the reference designators against the board or its boardview, read and save both original chips with an SPI programmer first, and make sure each file size matches the capacity of its target chip.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 11 May 2024 | Open file on RM Schematics |
| @generalbios | 4 Nov 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →