Merged firmware image for a 32-inch TV identified as LEO32HL, dated 1 February 2016. A merge file typically combines bootloader and main software into a single image intended to be programmed directly to the flash. The 3.42 MB size is below a full 4 MB chip, so check how your programmer handles the remaining space. Use it for logo hangs or corrupted software, but verify board labelling and panel type first and save the original flash content before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @led_software. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @led_software | 1 Jan 2019 | Open file on RM Schematics |
| @hashmielecom | 4 Mar 2023 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 29 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →