Binary firmware image of 4 MB for the Micromax 20M22HD, a small LED TV or monitor, named only by model. The size fits a 32 Mbit SPI flash typical of budget scaler boards. A repair technician would program it with a CH341A or similar device to fix a set with no picture, boot loop or dead standby after firmware corruption. As no board number is stated, confirm that your main board and panel match the original source unit, and read and save the existing chip contents before flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @hashmielecom. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →