Firmware set for the TP-Link TD-W8960N modem, hardware version 6, in a 5.72 MB RAR archive. The name does not state the flash chip or whether the image is a full dump or a vendor update file, so inspect the contents before choosing a recovery method. Full SPI images are written with a programmer, while update files are loaded through the web interface or serial bootloader. Make sure the hardware version on the router label is V6, and keep a backup of the existing flash before any write.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (7)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 9 Jun 2020 | Open file on RM Schematics |
| @laptexlaptopbios | 6 Jul 2020 | Open file on RM Schematics |
| @one5technology | 21 Nov 2020 | Open file on RM Schematics |
| @pepeelectronica | 26 Apr 2022 | Open file on RM Schematics |
| @skclappybios | 10 Apr 2024 | Open file on RM Schematics |
| @schematics_bios | 25 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 2 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →