Firmware dump for a Samsung 1731BF LCD monitor, taken from the main controller (CPU) side of the board. The 128 KB size points to a small 1 Mbit serial flash holding the scaler program. Technicians use it to repair monitors that stay dark, blink the power LED or show no menu after firmware corruption, by writing the flash with a programmer. Check the chip type on your board first, read and save its present contents, and make sure the monitor model and board match before writing."}
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 6 Apr 2017 | Open file on RM Schematics |
| @abgm_manutencao_bios | 10 Jul 2019 | Open file on RM Schematics |
| @abgm_manutencao_bios | 10 Jul 2019 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →