Firmware dump for a Samsung 1931BF+ LCD monitor, stored as a 128 KB raw binary. That size matches a 1 Mbit SPI flash, the kind often used with monitor scaler chips, though the name does not identify the controller. Technicians use dumps like this to revive monitors stuck on standby, with no menu or with corrupted boot code. Read the chip on the main board with a programmer, keep a backup, check that its capacity matches 128 KB, and only then write this image.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 12 Mar 2017 | Open file on RM Schematics |
| @abgm_manutencao_bios | 10 Jul 2019 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →