MSI firmware dump for mainboard MS-16J51, version 1.0, stored in a 7.94 MB RAR archive. MSI uses the MS-xxxxx numbering for its own boards, with the last digit typically identifying a board variant, so the full number on the PCB should match exactly. The archive likely contains a BIOS image meant for an SPI flash programmer. Read and back up the existing chip before writing anything, verify the image size against the flash capacity, and check that the extracted file is the complete image for your chip.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 29 Sept 2020 | Open file on RM Schematics |
| @biositechyangiyer | 5 Oct 2020 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →