Firmware image for the MSI MS-7593 motherboard, with 120 likely indicating the board revision and sized for a 4 MB flash chip, compressed to 594 KB. MSI desktop boards carry an MS-xxxx model code on the PCB, which should match. Such dumps are written with a programmer when a board fails to POST after a corrupted update. Read and keep the original chip first, then confirm the extracted image is exactly 4 MB so it fits the chip.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (11)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 1 Oct 2023 | Open file on RM Schematics |
| @generalbios | 2 Oct 2023 | Open file on RM Schematics |
| @generalbios | 4 Oct 2023 | Open file on RM Schematics |
| @generalbios | 4 Oct 2023 | Open file on RM Schematics |
| @generalbios | 8 Oct 2023 | Open file on RM Schematics |
| @generalbios | 9 Oct 2023 | Open file on RM Schematics |
| @generalbios | 9 Oct 2023 | Open file on RM Schematics |
| @generalbios | 13 Oct 2023 | Open file on RM Schematics |
| @generalbios | 15 Oct 2023 | Open file on RM Schematics |
| @generalbios | 20 Oct 2023 | Open file on RM Schematics |
| @generalbios | 26 Oct 2023 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →