MS-G013 VER 1.0 MODENA REV.A.BIN ClrMe LRT

BIOS .bin 8.00 MB Shared

Modified BIOS dump for an MSI board numbered MS-G013 version 1.0, the Modena design at revision A, as an 8.00 MB raw binary for a 64 Mbit SPI chip. The ClrMe tag indicates a cleared Management Engine region; LRT is an unexplained suffix, possibly a uploader tag. MS-numbered boards are MSI designs. Use it to restore firmware on a board that will not post, after confirming the PCB marking, backing up the existing chip with a programmer and checking that the image size matches the flash capacity.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files