Raw 16MB BIOS image for the MSI GS66 Stealth 10SE, prepared with the Intel Management Engine region cleaned and reported working. A clean ME region removes previous system state, which helps when a donor dump causes boot issues or the ME is corrupted. The BIN file is written directly to the SPI flash with a programmer such as a CH341A or similar. The size suits a 16MB (128Mbit) chip; verify your chip capacity, and back up the original to keep serial and board identifiers.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @CLRINDORE. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →