Firmware dump for an LCD/LED TV main board identified as MST182VG, carrying software version 1.3.01 dated 30 August 2012, with S and HY suffixes whose meaning the name does not explain. The MST prefix usually points to a MStar-based board. At 3.16 MB the image is smaller than a typical SPI flash, so it may be an upgrade file rather than a full chip dump. Compare it with the chip contents and board label before programming, and save the original flash with your programmer first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @led_software. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @led_software | 1 Jan 2019 | Open file on RM Schematics |
| @led_software | 17 Jan 2019 | Open file on RM Schematics |
| @hashmielecom | 4 Mar 2023 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 29 Apr 2025 | Open file on RM Schematics |
| @tvsoftwareworld | 9 Jun 2026 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →