Firmware archive with an uninformative name, giving only MX-1 and the year 2015, plus a tested and working note. No brand, board number or chip type is stated, so identify the exact device and flash chip before using it. At about 2 MB it would fit a 16 Mbit SPI chip, but check that against the actual part. Technicians write such images with a programmer to recover a bricked unit. Read and save the original chip contents first, and compare markings on the board.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 16 Sept 2020 | Open file on RM Schematics |
| @biositechyangiyer | 22 Sept 2020 | Open file on RM Schematics |
| @biositechyangiyer | 5 Oct 2020 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →