EDID data for an N156B3-L0B panel, revision C1, taken from an eMachines E642G laptop, a brand under Acer. The file is 256 bytes, holding a base EDID block and an extension block. It describes the panel's manufacturer, native resolution and timings to the graphics subsystem. Writing it to the panel EEPROM with an I2C programmer restores correct detection after corruption or a panel replacement. Confirm the panel label and revision match, check the checksum in an EDID decoder, and back up the original chip.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ITHINKHS | 8 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →