Firmware dump for Quanta board DA0ZRWMB6G0, revision G, with project code ZRW and model code N15Q1. Quanta codes start with DA0, followed by the project and the MB marking, with the revision at the end, so check every character against your PCB. The 4.34 MB ZIP is meant for reprogramming the SPI BIOS chip with a hardware programmer when the board will not start. Back up the existing chip first and verify that the image matches the flash capacity.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_laptop. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @bios_laptop | 15 Jun 2022 | Open file on RM Schematics |
| @Satale_bios_esquemas_Laptop | 27 May 2023 | Open file on RM Schematics |
How to open a .zip file
Compressed archive that every operating system opens without extra software.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →