Firmware dump for the Netis DL4311 device, hardware version 1.3, packed in a RAR archive of about 3.23 MB. The name identifies only the model and revision, so the exact flash chip and contents are not stated and should be checked after extraction. A dump like this is normally written back to the flash chip with a programmer when a unit is bricked by a failed update. Read and save the original chip contents first, and make sure the image size matches the capacity of the chip fitted on your board before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 8 Apr 2024 | Open file on RM Schematics |
| @generalbios | 8 Apr 2024 | Open file on RM Schematics |
| @generalbios | 4 Nov 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →